|
Configure Networking
2013/04/27 |
| [1] | Change to static IP addres if you use Ubuntu as a server. |
|
root@dlp:~#
vi /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo iface lo inet loopback
# The primary network interface
root@dlp:~# auto eth0 # make it comment # iface eth0 inet dhcp# add these lines iface eth0 inet static
address 10.0.0.30 # define IP address network 10.0.0.0 # define network address netmask 255.255.255.0 # define subnet mask broadcast 10.0.0.255 # define broadcast address gateway 10.0.0.1 # define default gateway dns-nameservers 10.0.0.10 # define name server initctl restart networking networking start/running |
| [2] | Disable IPv6 if not needed. |
|
root@dlp:~# echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.conf
root@dlp:~#
root@dlp:~# sysctl -p
eth0 Link encap:Ethernet HWaddr 00:0c:29:c5:2c:95
inet addr:10.0.0.30 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:473 errors:0 dropped:0 overruns:0 frame:0
TX packets:348 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:47149 (47.1 KB) TX bytes:46222 (46.2 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1450 (1.4 KB) TX bytes:1450 (1.4 KB)
|